Quote:
Originally Posted by JohnHorton
We also found that the voltage swing in ours was not enough to swing the DIO port, as the white wire went from 0.4v to 0.7v.
|
That suggests your Digital Sidecar is not functioning properly. What is the voltage on its signal pin when
nothing is connected to it? It should be 5 volts. The resistor you've added just duplicates what the DS is supposed to have present already.
Quote:
|
It could detect the retroreflective tape eight feet away.
|
While that's impressive, it might confuse others reading this thread. Keep in mind that the gaffer's tape on the floor is not retroreflective.