Thread: Help wiring gyro, then programming... please.
View Single Post
  #3   Spotlight this post!  
Unread 18-01-2011, 21:01
iv1777 iv1777 is offline
Registered User
FRC #1777
  
Join Date: Jan 2011
Location: Overland Park
Posts: 18
iv1777 is an unknown quantity at this point
Re: Help wiring gyro, then programming... please.
That is the same manual I used to figure out how to plug the gyro in in the first place. :O
We currently have the wires connected to the "Rate" contacts... I assumed that was the correct one for some reason...
Should it be connected to "Temp" for simple "Get current angle in comparson with a previously specified state" outputs?
We have tried sample code and also setting the Gyro's output to a line on the FRC Driver Station.
Thanks for a quick response.