[Straberrie]

Hey, we had the same problem.

Do the following:

1) Press the IP-RESET Switch on the cRio.
2) Hold down the Reset Button
3) Let Go
4) Connect a crossover from your computer to the cRio
5) Try the re-imaging the cRio again

You may get Error 7 from your cRio. We did, but it dissappeared once we tried re-imaging again.

Did you by any chance try loading the code before you reset the cRio after re-imaging? I do not know if that would cause the problem, but that's what happened to us.

Hope this works!