|
Re: How should we wire the photoswitchs?
Quote:
Originally Posted by tommy0019
There is a set of two pins right next to those 14 that are labeled pwr and (-). i am guessing that they supply power to the digital i/o pins. we put a volt meter on the pins and the supplied power when the jumper was connected.
|
Those pins are only an extra ground/5v set for devices that just need power.
Do not use a jumper to short those.
The Digital I/O was shorted out by that...
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 21-01-2011 at 16:14.
|