Quote:
Originally Posted by kamocat
This is only important with the RS232-CAN adapter.
All regular cables are straight through; it doesn't matter if the connector is reversed, so long as both ends match.
|
I'd really like to believe you, but, Appendix A of the MDL-BDC24 Brushed DC Motor Control Module Getting Started Guide for the Jaguar specifically says
Quote:
|
Cables must be “straight-pinned,” which means Pin 1 > 1, Pin 2 > 2, and so on. This is also referred to as a reverse-cable because the tabs on the connectors are on the opposite sides of the cable.
|
It would be nice to hear that this is true and that you are specifically having success with cables that do not satisfy the requirements of the manual.