[SudoSammich]

This is our first year running the camera on the cRIO, and we're having problems troubleshooting the camera networking.

We've completely wiped our wireless setup from last year and re-set up everything so it interfaces nicely, but the camera won't connect when we plug it into the cRIO. If we plug the camera into the router, we can connect, login and view the camera feed, but once we plug the crossover cable into the second port on the cRIO, nothing. We can't draw data, connect or even ping the camera, it just times out.

Our static IP setup is as follows:
10.5.14.1 = Gaming Adapter
10.5.14.2 = cRIO Port 1
10.5.14.3 = Open (camera is set to this static IP, but it won't return a ping)
10.5.14.4 = Linksys router
10.5.14.5 = Competition PC
10.5.14.6 = Open

Anybody else run into this problem? Any troubleshooting info? Thanks.