View Single Post
  #70   Spotlight this post!  
Unread 23-01-2011, 12:05
staplemonx's Avatar
staplemonx staplemonx is offline
The Idea Guy
AKA: JJ Biel-Goebel
FRC #1389 (The Body Electric)
Team Role: Mentor
 
Join Date: Jan 2011
Rookie Year: 2011
Location: Washington DC
Posts: 249
staplemonx has a reputation beyond reputestaplemonx has a reputation beyond reputestaplemonx has a reputation beyond reputestaplemonx has a reputation beyond reputestaplemonx has a reputation beyond reputestaplemonx has a reputation beyond reputestaplemonx has a reputation beyond reputestaplemonx has a reputation beyond reputestaplemonx has a reputation beyond reputestaplemonx has a reputation beyond reputestaplemonx has a reputation beyond repute
Re: Are extensions with bumpers after the start of the game legal

Quote:
Originally Posted by Nathan Streeter View Post
The bumper rules are certainly extensive! Most of the bumper construction is set out in the rules... There is also a required "bumper zone" so that all teams have their bumper at the same level, making tall bumpers less necessary. The bumper zone is 1"-7" from the ground... so the bumpers (which have to be 5" tall) have 1" of leeway. It's hard to tell, but using the 8" wheels as a reference, I'd estimate your bumpers may be too high for the bumper zone... maybe the plywood is just the wrong height though?

Yes, the wood should only be directly backed by metal - if the sides of your robot are 27" and 37", the wood should be a 3/4" thick piece of plywood with dimensions of 5" tall and either 27" or 37" in length. It's also required to protect the corners, a good way of doing this is putting a 5" long piece of pool noodle inside the fabric of the bumpers at the corners. We normally put this vertical 5" long noodle on the ends of the 27" long segments, but it doesn't matter where they go. :-)

I'm certainly impressed with the time/energy and CAD going into this from a rookie team... I really wish we competed at the same regional - maybe championships! ;-)
Cool so we can mount our bumpers so that they go from 2" off the ground to 7" off the ground. if we have a 1" leeywat and the actual bumper is only 5" tall.

Also we will get the corner fixed so that there is no wood overlap.

We have few funds so we are trying to be as precise with our virtual work as possible before we start cutting and buying. need to minimze waste. If anyone has some fundage they could spare the kids in south Philly would be very appreciative.
__________________
crazy engineer
www.jjbiel-goebel.com
helping team 1389
http://team1389.com/

Last edited by staplemonx : 23-01-2011 at 12:08.