Quote:
Originally Posted by Alan Anderson
Where is the camera connected? It needs to be on cRIO port 2 for the default Dashboard display to work.
Did you remember to install the 6v servo power jumpers on the Digital Sidecar for the PWM outputs they are connected to?
Do you have good communication and robot code lights on the Driver Station? Have you enabled the robot?
|
The camera is connected to the cRio through a cross-over, to Port 2.
This fixed the servo problem. We did not have the jumpers, now they are moving which means everything is alright with the cRio.
The communications are good, Robot Code light is on, and the Robot is enabled.
Do you by any chance know if the camera code is not what I need to have the image display?
Thank you!