[idahorobot]

Originally Posted by hg273

I haven't had experience with the new one, but here's a spec comparison:

Viair 090C 90 Series Air Compressor
*12-Volt
*Permanent Magnetic Motor
*Duty Cycle: 9% @ 100 PSI
*Max. Working Pressure: 120 PSI
*Inline Check Valve
*Amp Draw: 10 Amps
*Dimensions: 6.00” L x 2.10” W x 4.30” H
*Net Weight: 2.50 lbs.
*1.03 CFM at 0 PSI
*0.43 CFM at 90 PSI
*0.34 CFM at 120 PSI

Thomas Industries 405ADC38/12
*12-Volt
*Amp Draw: 10.5 Amps
*MAX. PSI CONT./INT. 100/100
*0.79 CFM at 0 PSI
*0.41 CFM at 40 PSI
*0.24 CFM at 100 PSI
*Diamensions: 7.50" L x 4.25" W x 5.375" H
*Motor: Shaded Pole, Thermally Protected with High Torque Start Winding
*Net Weight: 5.40 lbs

Huge weight savings to be sure!

This is at 13.2 volts