|
Re: RS775 Motor and 256:1 Gearbox CAD files
I was able to find a P60 Model on this site: http://www.3dcontentcentral.com/(A(S...ne bots%20p60
It's not the correct thickness, so you'll need to reference the spec sheet on BB and re-model the ring gear housing to be the correct thickness for a 256:1.
For the 775, I just used an FP or something similar, but then again, my model didn't need to be perfect.
__________________
-Dustin Benedict
2005-2012 - Student & Mentor FRC 816
2012-2014 - Technical Mentor, 2014 Drive Coach FRC 341
Current - Mentor FRC 2729, FRC 708
|