Quote:
First question...
How does the robot drive in teleop? Does it go in the correct directions forward/rev, turn etc. This must be correct before auto. What about speed? Our robot is pretty fast in teleop, but still very managable in Auto.
Next: How was the robot positioned when you started auto? Were the sensors on the line etc. If not, the robot WILL turn.
>>> another thing tht when when we put tape on the sensors they led changed the color !
The fact that this surprizes you means you have not read the instruction on how to calibrate them. THIS IS IMPORTANT. Find the small sheet of paper that came with them and read what the LED's mean. Until you adjust the sensitivity to be correct, they are worthless.
|
1. we ran the robot it in atonoumus ...
2. robot runs perfectly on tele op
3. you can see led change color as shinig tape is provided (meaning calibrarted)
4. code was used from ni (default robot frame work)
^^^^^
1. if any one has made thier own code regarding line tracker.... can you please please provide us as we only have one guy doing programming and he is new to labview as well
Thanks Phil bot for your anwser
error :: too many loop for robot drive