View Single Post
  #1   Spotlight this post!  
Unread 29-01-2011, 19:07
wazcodez's Avatar
wazcodez wazcodez is offline
Registered User
AKA: Megh Suthar
FRC #2076 (Blackscots)
Team Role: Programmer
 
Join Date: Oct 2010
Rookie Year: 2008
Location: Toronto
Posts: 19
wazcodez is infamous around these partswazcodez is infamous around these parts
Send a message via MSN to wazcodez
Re: LabView Programming - Do we still need Watchdog?

Quote:
Originally Posted by Mark McLeod View Post
I take it back...
I re-checked my notes and I misremembered one part.

This is what happens when a Safety vi trips.

The status on the Driver Station remains "Autonomous Enabled" or whatever field mode we're in.
The Diagnostics Message Window shows this error message each time it happens:
Code:
ERROR <Code> -44061 occurred at "Left and Right Motors" in the VI path: Robot Main.vi
<time>23:15:45 01/21/2011
FRC:  The loop that contains RobotDrive is not running fast enough. 
This error can occur if the loop contains too much code, or if one or 
more other loops are starving the RobotDrive loop.
If you have an autonomous that makes several drive moves then it will:
  1. do the first drive move for .1 second
  2. stop and display the error above
  3. do the second drive move for .1 second
  4. stop and display the error above
  5. etc.
If you have a bunch of moves close together you'll think the cRIO is pulsing.
How do you fix it ?
__________________
" When you copy from one source it's called plagiarism when u copy from multiple it's Research .. ! " - Megh Suthar
Reply With Quote