Quote:
Originally Posted by Mark McLeod
Have you tested all the Com ports, one after another?
A USB-serial converter will be a different port based on which USB port it gets plugged into and assigned.
|
The only COM ports were 1 and 3 (I always had the same USB port connected), and most of the controls were disable when I selected port 1. When I disconnect the serial-USB adapter, I noticed that COM port 1 stays on the list. It seems like BDC-COMM thinks there is another COM port on the computer, but I looked all over it and couldn't find one. When the USB cable is plugged in and I select COM port 3, everything is enabled, but the Jaguar still won't connect.