View Single Post
  #3   Spotlight this post!  
Unread 01-02-2011, 15:25
Michael Simmond Michael Simmond is offline
Registered User
FRC #3483
 
Join Date: Jan 2011
Location: Bozeman, Montana
Posts: 13
Michael Simmond is an unknown quantity at this point
Re: Optimum analog bandwidth for Gyro

Thanks for the information and the contacts.

The firmware may or may not be taking readings at the hardware's maximum conversion rate. But if conversions are being done at max speed and they are all being averaged before use in the accumulator, we could use a very high analog cutoff frequency without any problem.
Reply With Quote