Thread: Odd error when trying to use camera: No content-length token found in packet
View Single Post
  #3   Spotlight this post!  
Unread 02-02-2011, 19:52
flriley flriley is offline
Registered User
FRC #0086
  
Join Date: Feb 2011
Location: Jacksonville, FL
Posts: 5
flriley is an unknown quantity at this point
Re: Odd error when trying to use camera: No content-length token found in packet
We had the same issue for a while but we read up on it and were able to figure out that it's an issue due to the user info. In the FRC document "How to Configure your Camera" it gives working usernames and passwords that seem to eliminate this issue.

"How to Configure Your Camera
The camera comes with a network address of 192.168.0.90 and a root password of “pass”. The IP address is kept but the password for root must be updated to “admin” to work with the camera access software.

Manual Configuration of the Camera
The username/password combinations that work with the default code are shown in the table below. As long as at least one of these users is configured, the camera initialization software will work.
User name FRC
Password FRC
root pass (Axis default, must be changed)
root admin
FRC FRC"

Using the username "FRC" and password "FRC" has worked for us so far.
Reply With Quote