|
Re: Switching To Break via Software
Quote:
Originally Posted by Joe Ross
To cause a speed controller to switch between brake mode and coast, you can connect one of the digital outputs on the digital side car to the middle pin of the brake/coast header.
|
Only connect the center pin, don't conect the +/- on the break/coast header to anything on the side car. It is also possible to switch between Break and Coast in software using CAN without the additional digital output.
__________________
I'm Back
5279 (2015-Present)
3594 (2011)
3280 (2010)
1665 (2009)
1350 (2008-2009)
1493 (2007-2008)
1568 (2005-2007)
|