|
Re: crio run as startup wont work
Steps to run as startup:
Open Robot Main.vi and look at the "run" button (it's a triangle, along the toolbar on the top.)
If it is white and good, you can close Robot Main.vi. If it is grey and broken, there is an error in your code and you must fix it before compiling.
Open Autonomous Independent.vi and check that one too, if you have made any changes to it. Errors here will not be seen from Robot Main.
Go to FRC Boot-Up Deployment, right-click, and say "Build"
(wait for it to finish)
Assuming it finishes successfully, right-click again and say "Run as Startup".
You just forgot to build before downloading.
Also - If it says "Waiting for Real-Time Target to respond" with a button that says "Stop waiting and disconnect", it hasn't failed. It is just waiting. Let it wait.
__________________
Kettering University - Computer Engineering
Kettering Motorsports
Williams International - Commercial Engines - Controls and Accessories
FRC 33 - The Killer Bees - 2009-2012 Student, 2013-2014 Advisor
VEX IQ 3333 - The Bumble Bees - 2014+ Mentor
"Sometimes, the elegant implementation is a function. Not a method. Not a class. Not a framework. Just a function." ~ John Carmack
|