Thread: Number of Analog Input Channels
View Single Post
  #1   Spotlight this post!  
Unread 06-02-2011, 17:45
MotorHead's Avatar
MotorHead MotorHead is offline
Programming Mentor
AKA: Jeff Beltramo
FRC #1922 (OZ-Ram)
Team Role: Coach
  
Join Date: Jan 2008
Rookie Year: 2006
Location: Concord, NH
Posts: 68
MotorHead is a splendid one to beholdMotorHead is a splendid one to beholdMotorHead is a splendid one to beholdMotorHead is a splendid one to beholdMotorHead is a splendid one to beholdMotorHead is a splendid one to beholdMotorHead is a splendid one to behold
Number of Analog Input Channels
When defining analog input channels for Gyro's in LabView, the module is set to slot 1 and the channel selection only allows you to select one of two channels (AI 1 & AI 2). On the module though, there is 8 channels of input. I believe one of them is dedicated to battery voltage, but where are the other 5 channels?

OK, I just looked into this further. This seems to only be an issue with the Gyro vi's. When you setup a generic Analog Input channel, you can select all 8 input channels.

So I guess life is good as long as the gyro lives in the first two channels. Is this a known bug in LabView?
__________________
Jeff Beltramo
Team #1922
Concord, New Hampshire

Reply With Quote