Quote:
Originally Posted by Brandon_L
So the diameter of how the holes in the hub are layed out is the same as the holes in the sprocket? Awesome! thanks guys
|
Those dimensions are all correct, but only deal with the bore (the big hole in the middle of the sprocket.)
What you want to match up is the bolt circle diameter. If the 6 holes for mounting screws were placed on an invisible circle, the diameter of said circle would be the bolt circle diameter.
That 60 tooth sprocket has a bolt circle of 1.875". Now, VEXPRO doesn't list the specs of its sprocket, but I am pretty darn sure it's also 1.875". Don't take my word for it though.