Quote:
Originally Posted by ratdude747
are you sure your cabling is ok?
try setting a new ID to the jag. some of the gray jags have no ID and need to be set (assign button +paperclip in user button).
|
Cabling/terminator all check good. 3 jags on CAN all (2 black, 1 gray) check good via BDC Comm. Tried a couple times to assign, but can't select the board ID of the gray because it doesn't show up. Just see the black jag acting as serial bridge in BDC Comm, solid amber LED. The gray jag shows a blinking yellow which means it's not communicating. However think I should be able to see the board ID in the drop down.