Quote:
Originally Posted by Vikesrock
2175 will have at least 8 (6 drive, 2 manipulator) + at least 2 pneumatic cylinders.
|
Namely 4 CIMs and 4 RS 775s, which aren't low power/current draw motors. I don't foresee any problems with draw unless we're accelerating forward and sideways and lifting the elevator (and probably firing all solenoids back and forth repeatedly) - all at the same time.
Just make sure you don't do anything like
this; keep all motors at or below half-stall torque most of the time and you should be fine.