|
Re: Power pole connector between pd and breaker
Quote:
Originally Posted by Al Skierkiewicz
Indie left out this...
<R37> The 12V battery, the main 120-amp circuit breaker, and the PD Board shall be connected as shown in Figure 3-4. In particular:...
That doesn't leave any room for interpretation, sorry.
Although it will make things easy for you, it adds two more contact areas to heat and fail, it gives you four more crimps and up to 4 additional feet of wire if you don't cut the #6 to size. Those losses start to add up. You should try to minimize electrical loss especially in the primary wiring.
|
Ah, I missed that too. Yep, that just about seals it.
__________________
Matt Krass
If I suggest something to try and fix a problem, and you don't understand what I mean, please PM me!
I'm a FIRST relic of sorts, I remember when we used PBASIC and we got CH Flightsticks in the KoP. In my day we didn't have motorized carts, we pushed our robots uphill, both ways! (Houston 2003!)
|