|
Re: pic: Just a few parts left
This inspired me. So.... I walked to the OSH in the shopping center next to my office and found this $9.99 junky little "KC Professional" 3.6v cordless screwdriver with 21 piece tool bit set. I figured, "What the heck, ten bucks".
When I pulled the 6 screws out that held it together, what should I find but a RS380 driving the whole thing. It has a 3 stage planetary transmission on it. (I'm not going to be using it for much of a load, so it should be "fine")
I can literally just pull the pinion off this bad boy and press it onto our RS395 and reassemble it with very little mods at all. I'll post pictures once I get it finished. That should be this afternoon. In the mean time, here is a teaser.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|