Thread: 1/2" Shaft Encoders
View Single Post
  #1   Spotlight this post!  
Unread 10-02-2011, 16:43
noa_n_f noa_n_f is offline
Registered User
FRC #1378
  
Join Date: Dec 2010
Location: Hawaii
Posts: 14
noa_n_f is an unknown quantity at this point
1/2" Shaft Encoders
How do most people use encoders on half inch drive shafts? Is it easiest to convert down to a smaller shaft or are there reliable encoders with a 1/2" hole (and if so, any specific suggestions)?

Thanks