Quote:
Originally Posted by WireFreaks2156
OK, so the blue and black will go to the power board, and the others go to the sidecar. I can't find the actual instructions anywhere.
|
Brown goes to power (a red connector) on the power distribution. Blue goes to ground (a black one).
Quote:
|
So I am thinking then we will connect the other two leads to the sidecar on 3 of the digital i/o connectors.
|
You only need one of the black or white wires from each sensor. The LabVIEW line-tracking code expects white. Don't connect anything to the ground or power pins of the Digital I/O connectors.