Thread: RSL (Orange Light) Works, but not from the DSC
View Single Post
  #10   Spotlight this post!  
Unread 11-02-2011, 13:48
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
  
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,795
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: RSL (Orange Light) Works, but not from the DSC
Quote:
Originally Posted by Seathan93 View Post
I suppose we could also have swapped the 5v Dlink onto the 5v slot and remove the 12-5v converter heat sink from the KOP. Would that also work? or does it have to be in a side port on the 20A breaker?

Either way the RSL works now thank you for the help.

-Ian
Nope,
The dedicated 12 volt output that should now feed the 5 volt convertor for the Dlink is specially designed to supply 12 volts even as the battery voltage falls to 5.5 volts and below. The power supplies in the DSC will regulate even with the battery down to about 6.5-7 volts and can handle short drops below that. Connecting a 5 volt source to the power input on the DSC will not provide the voltages required for the DSC electronics.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.