[Al Skierkiewicz]

Guys,
The Gdc answered this question a week or so ago. Their response is
"Only items sold as "limit switches" are allowed on the MINIBOT. Documentation and/or packaging material should be used to document items that may not be clearly identified as such. "
It seems that is pretty clear that any switch labeled as a limit switch meets the criteria.
As to the automationdirect link, those switches meet the criteria but the fact that they mount and wire using 1/2" conduit fittings likely make them too heavy for minibot use.
As to the other links that show "limit switch" in the title, likewise those fit the GDC description above. Inspectors are guided first by written rules (including all Team Updates) and second by GDC Q&A response. If the rules do not cover a situation and their is no response from the GDC on the issue, an inspector then turns to his LRI for the answer. If the LRI is not able to come to a conclusion, they will turn to the FTA, Head Ref, and other key volunteers for advice. If the issue still is undecided, LRIs will have my phone number and I will be able to get to someone at First or Bill Miller if needed.