Thread: No Robot Code No More :-(
View Single Post
  #3   Spotlight this post!  
Unread 13-02-2011, 09:29
msulaimain's Avatar
msulaimain msulaimain is offline
Registered User
AKA: Muhammad Sulaiman
FRC #3346 ([{Kamikaze Komets}])
Team Role: Programmer
  
Join Date: Mar 2010
Rookie Year: 2009
Location: USA
Posts: 36
msulaimain can only hope to improve
Send a message via AIM to msulaimain Send a message via Yahoo to msulaimain
Re: No Robot Code No More :-(
I believe you need to re-image the Crio again with the 2011 version for it and have you performed all of the software updates because there were some for the programming platforms and driver station as well.

What you need to do:

Re-image the Crio
Perform all updates: which can be found on "firstforge"
Make sure you have got your bridge set up properly. If you are not sure of this, then reset the bridge and configure it again. Also make sure your converter for the bridge is wired correctly as well.

Good Luck! If you need any more help, just ask.
__________________
int main()
{
::::::::: include=>commitment;
::::::::: int=>school name=>Asheboro::High
::::::::: int=>team name=>Kamikaze::Komets;
::::::::: Priority_Queue=>FRC Championship::2012;
::::::::: Max_Element=>Teamwork;
}