Thread: Tethered operation unsuccessful... =(
View Single Post
  #1   Spotlight this post!  
Unread 14-02-2011, 13:05
Nirnaeth Nirnaeth is offline
Coach/Mentor
AKA: Michael Liang
FRC #6367 (The Brooke High ElectroLights)
Team Role: Mentor
  
Join Date: Jan 2010
Rookie Year: 2001
Location: Boston, MA
Posts: 44
Nirnaeth has much to be proud ofNirnaeth has much to be proud ofNirnaeth has much to be proud ofNirnaeth has much to be proud ofNirnaeth has much to be proud ofNirnaeth has much to be proud ofNirnaeth has much to be proud ofNirnaeth has much to be proud of
Tethered operation unsuccessful... =(
Our team is trying to go through the basic motor control tutorial, but can't get our motors to work. We're stuck at the simple motor control vi deployment.

1. Our program is correct, afaik.
2. The code pushes down to the cRIO successfully.
3. The LEDs on the cRIO are all on.
4. The digital sidecar's LEDs are all green.
5. The Jaguar continues to flash yellow/orange.
6. The motor does not move.

Any advice? Is our sidecar dead? I'm pretty sure our cRIO is working fine as when we log into driver station it indicates there's communication and also the VI deploys onto the cRIO fine.
Reply With Quote