Quote:
Originally Posted by billbo911
Would it be legal to open the motors for the purpose of cleaning them as long as they were not modified in any way?
|
Well <r47> states
Quote:
<R47> Motors and servos used on the ROBOT shall not be modified in any way, except as follows:
A. The mounting brackets and/or output shaft/interface of the motors may be modified to
facilitate the physical connection of the motor to the ROBOT and actuated part.
B. The electrical input leads on the motors may be trimmed to length as necessary.
C. The locking pins on the window motors may be removed.
D. The connector housings on the Window motors (PN 262100-3030 and 262100-3040) may
be modified to facilitate lead connections.
|
I would take that as a "no" just to be on the safe side.