|
Re: Potentiometer Placement
Bore a hole slightly smaller in the end of the 1/2 shaft and press fit the pot's shaft in. Or if there is a flat head on the output from the encoder you can bore a hole the same diameter as the Pot's output shaft and drill/tap a set screw hole through the 1/2 shaft.
__________________
Travis Takashima
Team Leader: Team 4270 - 2016-beyond
Mentor and Team Leader: Team 2504 - 2009-2016
Team 2504 Alum 09'
Attending
-FIRST BAE Systems Hawaii Regional
|