Quote:
Originally Posted by elbuo
From what I'm understanding every relay must be protected by 1 and only 1 20A Fuse. Therefore they will be protected under the same fuse.
|
The potential problem lies within the second part of the rule.
<R39>B. Each relay module branch circuit must be protected with one and only one 20-amp circuit breaker on the PD Board.
No other electrical load can be connected to the breaker supplying this circuit.
Perhaps if you provided a circuit diagram or:
- explained what two relays are doing in a singe circuit that one couldn't do, or
- explained why the relays can't connect to separate 20A ports on the PD board