|
Re: Alternatives to Banebots transmissions.
Quote:
Originally Posted by squirrel
we have a relatively light arm, and with some latex tubing and 4:1 reduction from a V belt system, we have no problem driving it with a window motor.
They're in the KOP. They're funky as far as mounting and shafts and whatnot, but might do the job.
Kinda depends on what you're doing with it, you didn't provide pictures so it's going to be guesswork on our part
|
Yep, this was the other alternative we were looking at last night. The reason we are steering away from it is only because we would like a little more speed out of the system. Yes, it absolutely would get the job done, but as you said, it will be rather tricky getting all the pieces to work together. It is on the short list if we bend the FP shaft.
Slow motion is way better than no motion!
I'll try to get some pictures up this evening.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|