Quote:
Originally Posted by wdell
According to "How to Set Up Your Robot Control System", the cRio can be set up with 9201 (analog) modules in slots one and two, 9403 (digital) modules in slots 4 and 6, and a 9472 (solenoid) module in slot 8. The document also says you have to attach the analog breakout to the module in slot one.
|
You can also put a 9472 in slot 7. I guess the document you are reading is 2 years old.
Quote:
Originally Posted by wdell
To me this kind of implies you can move all your analog stuff to slot two, digital stuff to six, etc.
Haven't tried it myself (we don't even have a robot yet... don't ask), but might be worth looking into.
|
There are several problems with this. The battery voltage is read from slot 1, therefore the battery jumper must be installed on the analog bumper on slot 1. The Robot Signal Light must be connected to the digital sidecar on slot 4. The gyro accumulators are only connected to the first 2 channels of slot 1.
-Joe