Quote:
Originally Posted by Joe Ross
You didn't enable the robot on the driver station
You didn't plug the PWM cables from the victor to the digital sidecar PWM ports
The PWM cable missed the connector inside the shroud on the victor (this is very easy to do).
You didn't power the digital sidecar
The digital sidecar isn't plugged into the digital module in slot 4 of the cRIO
You have the PWM cables plugged in backwards. B is for black wire.
You have the PWM cables plugged into the wrong PWM ports on the digital sidecar.
The circuit breaker is immediately tripping.
The speed controller isn't powered.
The motor isn't connected to the speed controller.
|
We covered the majority of those grounds last night. We plan on re-checking today after school.
However, the motor is getting power, and is blinking orange.