|
Re: powering two cameras
They might answer a question like "Can we power more than one camera from the PD dedicated camera power supply if all other electrical rules are followed?"
I cannot see any rules that prohibits two cameras electrically. However R38.D & R40 are two rules I would check. Also, does not the +5 volt supply on the breakout or DSC also power the camera?
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
Last edited by Al Skierkiewicz : 17-02-2011 at 11:00.
|