Thread: Solenoid Valves from previous years
View Single Post
  #7   Spotlight this post!  
Unread 19-02-2011, 00:00
tux tux is offline
Registered User
AKA: Lee Harr
FRC #3842 (Shock-a-Bots)
Team Role: Mentor
  
Join Date: Apr 2005
Rookie Year: 2005
Location: Rochester, NY
Posts: 91
tux is an unknown quantity at this point
Re: Solenoid Valves from previous years
>I believe most 3000 series valves flow less than .30cv so they should be legal.
>You can get the real data sheet from SMC's website.

I found the correct sheet.

It looks like it is possible to have a Cv of .33 with a certain configuration (3-position, Exhaust Center) but I believe that the valve we have (SY3240) indicates 2-position.

Under Port Diameter it says: Rc(PT)1/8. Is that the same as 1/8" NPT?

Also it looks like their maximum pressure is 0.7 MPa (101 psi) so we will have to install an additional pressure relief valve set to that pressure.

Thanks for your help.