|
Re: Bumper Question
If your bumpers are resting on bolt heads that are used for fastening frame parts and they are not more than 1/4" thick then that meets bumper rules. If the bolts extend beyond the allowable size of the robot STARTING CONFIGURATION then you have a different issue. Under all circumstances the robot must fit inside the box.
If your bolt heads are larger thicker than 1/4", Eric's tip is acceptable assuming all other rules are followed. Gary's interpretation of the 8" rule is correct. The gap in your supporting frame structure can be less than 8" long.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|