|
Re: Jaguar Issues...
A shot in the dark here, but we saw a similar issue this year...
Turned out it was a wire that wasn't stripped enough in the power distribution board. When it was put into the WAGO connector on the PDB, the WAGO connector didn't make solid contact with the wire. Instead, it pinched the insulation.
Strangely, enough juice still got through to power the Jag, and barely move the motor, but once you got it going, the voltage would drop too low, and the Jag would undervolt.
__________________
In life, what you give, you keep. What you fail to give, you lose forever...
|