|
Re: WiFi/Bridge/CRIO Boot Conflict
I was told last night in AP mode the Bridge can act as a repeater.
And to clarify I tried only unplugging the Ethernet cable from the cRIO when I plugged it back in all I got was the port light on the bridge to come back on. The bridge wasn't configuring the connection. When I rebooted the cRIO however we noticed the Port 1 light on the bridge flash a bit. and then the bridge connected to the WiFi within seconds. The real issue is the bridge looks like it's connected to the cRIO when looking at the lights, but then it never finds the WiFi. When I rebooted the cRIO and the IP was established between the Bridge and cRIO then the bridge immediately connected to the WiFi.
__________________
John Fogarty
2010 FTC World Championship Winner & 2013-2014 FRC Orlando Regional Winner
Mentor FRC Team 1102 M'Aiken Magic
"Head Bot Coach" FTC Team 11444 Garnet Squadron
Former Student & Mentor FLL 1102, FTC 1102 & FTC 3864, FRC 1772, FRC 5632, FRC 4901
2013 FTC World Championship Guest Speaker
|