Quote:
Originally Posted by Danny Diaz
<shakes cobwebs out of brain> Yeah, you're right. I completely stoned on the fact that it's a static IP address - even if the DAP comes up last, there should absolutely be no issue unless the software running on the cRIO gets into a funky state without a network.
If you unplug the network connection from the cRIO, then reboot the cRIO, then after a couple minutes plug in the ethernet connection, can you talk to the cRIO? You should be able to ...
-Danny
|
Just rebooting the cRIO with the bridge still on fixes the problem in seconds.