|
Re: Updated C-Rio and Labview now code doesnt do ANYTHING
Quote:
Originally Posted by whcirobotics
Hi CD,
We just updated our labview to v3.2, and CRiO Image to v28. Before we updated the labview and the C-Rio the code worked fine, it drove and everything worked. But right now, today on the final day of the build season, we decided to pack it in and decided on updating it and ........ Now it does not work AT ALL! It does not read the joystick command, the compressor does not turn on. And we have a bit less than 7 hours to get it working and get it tested. I dont know what the update did to the software but it screwed us up BIG TIME. Please help us.
Thanks
|
When you install the 3.2 LV update and then flash the cRio, you need to "Build" your code again and then do a "Run as Startup".
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|