[Matthew Blake]

ok, heres a way to test if you are connected to the CRIO and the router.

1. go to the start menu search bar and find the cmd prompt
2. ping your router's IP by typing in ping 10.xx.yy.zz where xx and yy are your team numbers and zz is any number between 0-255*
3. ping your CRIO's IP by typing in ping 10.xx.yy.zz where xx and yy are your team numbers and zz is any number between 0-255*

*if you have not set these up yet, then the ping will fail

If these do not return received, then you need to reconfigure your IP settings to match. Type in ipconfig in the cmd prompt to see your current IP address. To find out what to configure your IP settings to, go to the FIRST website and search for setting up your wireless router and configuring the IP address.

Hope this helps!