|
Re: Does the I/O section of the FRC Driver Station need to work?
Here's my method of programing problem solving.
- Run trough your code with a fine tooth comb while electrical checks their wiring.
- When electrical tell you it's good check your code again.
- When you are sure beyond any doubt that your code is correct check electrical's work yourself.
- Fix the wiring.
If at any point you find a code error quickly fix it and blame electrical for not giving you enough time to work on the robot.
Not the prettiest way of doing things but it gets the job done.
__________________
2791 Shaker Robotics (2013-present)
--Control Systems Mentor 2013-present
--Drive coach 2015-present
1676 The Pascack π-oneers (2010-2013)
--Drive coach 2011-2013
--Lead Programmer 2011-2013
|