Thread: Have problem on returning the camera image back to the driver station.
View Single Post
  #5   Spotlight this post!  
Unread 02-03-2011, 10:33
Greg McKaskle Greg McKaskle is offline
Registered User
FRC #2468 (Team NI & Appreciate)
  
Join Date: Apr 2008
Rookie Year: 2008
Location: Austin, TX
Posts: 4,752
Greg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond repute
Re: Have problem on returning the camera image back to the driver station.
Neither the camera or the cRIO support auto-sense. So, you have to use the correct cable -- patch or crossover. If either device on attached to the cable will auto-sense, then you no longer care what type of cable.

If you are plugging the camera into port 2 of the cRIO, use 192.168.0.90 for the camera IP and use a cross-over.

If you are plugging the camera into the dlink, the IP should be based on the team number and it doesn't matter what type of cable. You also need to change the driver station to ask for the jpg or mjpg directly and not expect the cRIO to deliver it.

Greg McKaskle
Reply With Quote