For General Part and Assembly Design (Typically Fewer than 1,000 Parts)
Microsoft® Windows 7 (32-bit or 64-bit) Home Premium, Professional, Ultimate/Enterprise, or Microsoft® Windows Vista® (SP2) (32-bit or 64-bit) Home Basic, Home Premium, Business, Enterprise, or Ultimate, or Microsoft® Windows XP Professional (SP3) or Professional x64 Edition (SP2) (1,2)
Intel® Pentium® 4, 2 GHz or faster, Intel® Xeon®, Intel® Core™, AMD Athlon™ 64, or AMD Opteron™, or later (3)
2 GB RAM or more (4)
Microsoft® Direct3D 10® or Direct3D 9® capable graphics card (5)
DVD-ROM drive (6)
Microsoft® Mouse-compliant pointing device
1280 x 1024 or higher screen resolution
Internet connection for web downloads and Subscription Aware access
Adobe Flash Player 10 (7)
Microsoft® Internet Explorer® 6.x through 8
Microsoft® Excel 2003 through 2007 for iComponents, thread customization, and spreadsheet-driven designs
For Complex Models, Complex Mold Assemblies, and Large Assemblies (Typically More than 1,000 Parts)
Windows 7 64-bit, Windows Vista 64-bit (SP2), or Windows XP Professional x64 Edition (SP2)
AMD64 or Intel® 64 processor
6 GB RAM or more
CAD workstation-class graphics card
( Taken from:
http://usa.autodesk.com/autodesk-inv...-requirements/ )
You might be able to get away with an older OS, I haven't tried it...
However, even if you can get it to run, that 1gb of ram is really going to choke your computer. You will be able to open the KOP parts, but don't expect to make any complex assemblies with them.
Please let me know if I can help at all with the set-up process, I've walked a lot of people through it. Just PM me
Good Luck