View Single Post
  #18   Spotlight this post!  
Unread 04-03-2011, 03:11
TerryS's Avatar
TerryS TerryS is offline
Registered User
FRC #2445 (RoboKap)
Team Role: Mentor
 
Join Date: Jan 2011
Rookie Year: 2009
Location: Kapolei, HI USA
Posts: 83
TerryS is an unknown quantity at this point
Re: Minibot Motor Press Fit

Quote:
Originally Posted by DinerKid View Post
McMaster has set screw collars that are as small as 2mm bore...

Those are not exactly what i was talking about though. I was thinking about something like a 2 piece clamp on shaft collar. Lets hypothetically say you were trying to attach a wheel onto the shaft, you could make the wheel 2 pieces and put it together like a 2 piece shaft collar.

Set screw collar with 2mm bore: http://www.mcmaster.com/#shaft-collars/=ba2mtj PN: 57485K61
The OD on this one is 6.4mm that seems like plenty for you to ream it out to 2.5mm ID if you wanted to

2 piece shaft collars: http://www.mcmaster.com/#shaft-collars/=ba2k88

~DK
Are these legal minibot materials? Do they fall under "S. Mechanical fasteners"?
Reply With Quote