Thread: WPI Lib Relay class - individual line control
View Single Post
  #12   Spotlight this post!  
Unread 07-03-2011, 18:20
Ether's Avatar
Ether Ether is offline
systems engineer (retired)
no team
  
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,089
Ether has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond repute
Re: WPI Lib Relay class - individual line control
Quote:
Originally Posted by de_ View Post
As far as I can tell this constraint is NOT in the spike hardware. If you connect 12v to the input on the spike and put 5v on the red control line, one output line follows it and has no effect on the other line controlled by the white wire (which could be on or not). Same for the White. So the concept of Forward (one line switched high, and the other one automatically low) and Reverse is not native to the spike based on my testing.
Thanks for this additional detail. I was going from memory from last year. I went back and re-checked the datasheet and it appears you are correct.

I will correct or delete my earlier post(s) to the contrary.


Last edited by Ether : 07-03-2011 at 19:14.
Reply With Quote