Quote:
Originally Posted by NOV8R
Each motor armature has a two inch long 3/8 diameter extension. The extensions are covered in latex tubing and drive directly on the pole. The minbot frame is 8 inch by 3 1/2 inch 1/16 thick Lexan. There are two pieces of 6 inch long 1/2 inch aluminum tubing attached to the frame that guide the minibot off the deployment tray. The only other components are two lamp switches and the Tetrix battery.
|
Ahhh! I didn't see the 720p option. I thought I saw an extension type thing on the motors! Bravo to your design. We had something like that in mind but slightly different. Again grats!