|
Re: 2011 Oregon Regional
Update your classmate software before you arrive: Driver Station: 02.27.11.00
Update the cRIO firmware to v28 first thing Thursday morning. Come prepared with the updated software.
Get the D-Link radio WPA key done early.
Make sure that the D-Link is powered by the 12V-5V convertor, which in turn is powered though the dedicated 12V supply on the PD. (Not through the 12V breakers). This makes a huge difference on the field. Use the right angle power connector that came with the D-Link. Loss of power to the D-Link will halt you for 60sec or more on the field.
__________________
Andrew Nicholson
2011 FRC Robot Inspector (Seattle, Portland)
Mentor FRC 1778 "Chill Out", FTC 3018, 3940 "Hawks", 4434 "Heat Misers"
"Everything should be made as simple as possible, but no simpler."
|